Extreme Networks ExtremeWare XOS Command Reference Manual page 114

Commands for Managing the Switch
The following command adds the IP address 10.101.0.105 as a trap receiver with community string
green, using port 3003:
configure snmp add trapreceiver 10.101.0.105 community green port 3003
The following command adds the IP address 10.101.0.105 as a trap receiver with community string blue,
and IP address 10.101.0.25 as the source:
configure snmp add trapreceiver 10.101.0.105 community blue from 10.101.0.25
History
This command was first available in ExtremeWare XOS 10.1.
The , , and
hex_community_name from <src_ip_address> {mode <trap_mode> [enhanced |
parameters were added in ExtremeWare XOS 11.0.
standard]}
Platform Availability
This command is available on all platforms.
114
ExtremeWare XOS 11.3 Command Reference