Configure Syslog Delete - Extreme Networks ExtremeWare XOS Command Reference Manual

configure syslog delete

configure syslog delete [all | <ipaddress> | <ipPort>] {vr <vr_name>}
{local0 ... local7}
configure syslog delete <host name/ip> {: <udp-port>} [local0 ... local7]
Description
Deletes a remote syslog server address.
Syntax Description
all
ipaddress
ipPort
vr_name
local0 ... local7
Default
If a virtual router is not specified, VR-Mgmt is used.
If a UDP port number is not specified, 514 is used.
Usage Guidelines
NOTE
The BlackDiamond 8800 family of switches and the Summit X450 switch do not support user-created VRs.
This command is used to delete a remote syslog server target.
Example
The following command deletes the remote syslog server with an IP address of 10.0.0.1:
configure syslog delete 10.0.0.1 local1
History
This command was first available in ExtremeWare XOS 10.1.
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
ExtremeWare XOS 11.3 Command Reference
Specifies all remote syslog servers.
Specifies the remote syslog server IP address.
Specifies the UDP port number for the syslog target.
Specifies the virtual router that can reach the server IP address.
NOTE: The BlackDiamond 8800 family of switches and the Summit X450
switch do not support user-created VRs.
Specifies the local syslog facility.
configure syslog delete
501