Extreme Networks ExtremeWare XOS Command Reference Manual page 173

* change your SNMP public and private strings
* consider using SNMPv3 to secure network management traffic
In addition, you can return to safe defaults mode by issuing the following commands:
●
unconfigure switch
●
configure safe-default-script
If you return to safe defaults mode, you must answer the questions presented during the interactive
script.
For more detailed information about safe defaults mode, see
in the ExtremeWare XOS Concepts Guide.
Example
The following command enables all SNMP access for the switch:
enable snmp access
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
all
enable snmp access
"Safe Defaults Setup Method" on page 47
173