Show Log Configuration Filter - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Status Monitoring and Statistics

show log configuration filter

show log configuration filter {<filter name>}
Description
Displays the log configuration for the specified filter.
Syntax Description
filter name
Default
If no options are specified, the command displays the configuration for all filters.
Usage Guidelines
This command displays the configuration for filters.
Example
The following command displays the configuration for the filter, myFilter:
show log configuration filter myFilter
The following is sample output from this command:
Log Filter Name: myFilter
I/
E Comp. Sub-comp.
- ------- ----------- ----------------------- --------
I STP
I aaa
Include/Exclude: I - Include,
Component Unreg: * - Component/Subcomponent is not currently registered
Severity Values: C - Critical,
Debug Severity : S - Debug-Summary,
If Match parameters present:
Parameter Flags: S - Source,
Parameter Types: Port - Physical Port list,
542
Specifies the filter to display.
Condition
E - Exclude
E - Error,
* - Pre-assigned severities in effect for specified component
V - Debug-Verbose,
+ - Debug Severities, but log debug-mode not enabled
D - Destination, (as applicable)
I - Ingress, E - Egress,
MAC - MAC address,
VID - Virtual LAN ID (tag),
L4 - Layer-4 Port #,
Nbr - Neighbor, Rtr
Proc - Process Name
Severity
CEWNISVD
--------
--------
W - Warning, N - Notice,
D - Debug-Data
B - BGP
Slot - Physical Slot #
IP - IP Address/netmask,
VLAN - Virtual LAN name
Num - Number, Str
- Routerid, EAPS - EAPS Domain
ExtremeWare XOS 11.3 Command Reference
I - Info
Mask - Netmask
- String