Extreme Networks ExtremeWare XOS Command Reference Manual page 443

Detailed Status
●
Priority—Displays the port's configured PoE priority value, as follows:
●
Critical
■
High
■
Low
■
Example
The following command displays summary inline power information for ports 1 to 3 on slot 3:
show inline-power info ports 3:1-3
Following is sample output from this command:
Port State Class
3:1 delivering class3
3:2 delivering class3
3:3 searching ------
The following command displays detail inline power information for port 1 on slot 3:
show inline-power info detail port 3:1
Following is sample output from this command:
Port 3:1
Configured Admin State: enabled
Inline Power State
MIB Detect Status
Label
Operator Limit
PD Class
Max Allowed Power
Measured Power
Line Voltage
Current
Fault Status
Detailed Status
Priority
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the G48P module installed in the BlackDiamond 8800 family of
switches.
ExtremeWare XOS 11.3 Command Reference
Volts Curr
(mA)
48.3 192
48.3 192
0.0 0
: delivering
: delivering
:
: 16800 milliwatts
: class3
: 15.400 W
: 9.400 W
: 48.3 Volts
: 193 mA
: None
:
: low
show inline-power info ports
Power Fault
(Watts)
9.300 None
9.300 None
0.0 None
443