Commands for Managing the Switch
Example
The following command specifies a target parameters entry named P1, a user name of guest, message
processing and security model of SNMPv2c, and a security level of no authentication:
configure snmpv3 add target-params P1 user guest mp-model snmpv2c sec-model snmpv2c
sec-level noauth
History
This command was first available in ExtremeWare XOS 10.1.
The
and
parameters were added in ExtremeWare XOS 11.0.
hex_param_name
hex_user_name
Platform Availability
This command is available on all platforms.
136
ExtremeWare XOS 11.3 Command Reference