Show Checkpoint-Data - Extreme Networks ExtremeWare XOS Command Reference Manual

show checkpoint-data

show checkpoint-data {<process>}
Description
Displays the status of one or more processes being copied from the master MSM to the backup MSM.
Syntax Description
process
Default
N/A.
Usage Guidelines
This command displays, in percentages, the amount of internal state copying completed by each process
and the traffic statistics between the process on both the master and the backup MSMs.
This command is also helpful in debugging synchronization problems that occur at run-time. To check
the status of synchronizing the MSMs, use the
Depending on the software version running on your switch and the type of switch you have, additional
or different checkpoint status information may be displayed.
Example
The following command displays the checkpointing status and the traffic statics of all of the processes
between the master and the backup MSM:
show checkpoint-data
The following is sample output from this command:
Process Tx
----------------------------------------------------------------------------
devmgr 3812
dirser 0
ems 5
nodemgr 0
snmpSubagent 0
snmpMaster 0
cli 0
edp 0
cfgmgr 82
elrp 0
vlan 1047
aaa 0
ExtremeWare XOS 11.3 Command Reference
Specifies the name of the processes being copied.
show switch
Rx Errors Sent
1731 0 3
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
82 0 1
0 0 0
1 0 0
0 0 0
command.
Total % Chkpt
3 100% ON OK
0 0% ON OK
0 100% ON OK
0 0% ON OK
0 0% ON OK
0 0% ON OK
0 0% ON OK
0 0% ON OK
1 100% ON OK
0 0% ON OK
0 100% ON OK
0 0% ON OK
show checkpoint-data
Debug-info
1 (00008853)
1 (000008D3)
1 (000008D3)
1 (000008D3)
1 (000018D3)
1 (000008D3)
1 (000018D3)
1 (000008D3)
1 (000018D3)
1 (000008D3)
1 (000008D3)
1 (000008D3)
183