Show Inline-Power Slot - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

show inline-power slot

show inline-power slot <slotlist>
Description
Displays inline power information for the specified slots.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
slotlist Specifies one or more slots.
Default
N/A
Usage Guidelines
The output displays the following inline power information for the specified slots:
• Common Power:
— Configured: Displays in watts the configured amount of common power available. This amount is
equal to the total amount of configured power minus the amount of configured reserved power.
— Allocated: Displays in watts the amount of common power allocated.
• Reserved Power:
— Configured: Displays in watts the amount of power configured as reserved.
— Allocated: Displays in watts the amount of reserved power utilized.
• Measured Usage—Displays measured power in watts.
Example
The following command displays inline power information for slot 1:
show inline-power slot 1
Following is sample output from this command for the Alpine switches:
Common Power
Slot Configured Allocated
1 22000mW 5400mW
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
2322
Reserved Power
Configured Allocated Measured Usage
10000mW 10000mW 150 mW
ExtremeWare 7.5 Command Reference Guide