Upgrading Slot Images On Modular Devices - Extreme Networks EPICenter Software Installation Manual

Configuration Manager
To upgrade the BootROM on a device, do the following:
1 In the Download Options box select the BootROM Download button to specify a BootROM
upgrade.
This displays the Selected BootROM Image field.
2 Click the Select Image... button to display the Select Software Image window. Select the software
image you want to download from the Select Software Image window and click OK.
For more information about selecting BootROM images, see "Selecting Software Images" on
page 181.
3 Indicate whether the devices should be rebooted:
— Click Do not reboot after download to indicate the devices should not be rebooted.
— Click Reboot immediately after download to indicate the devices should be rebooted
immediately after the download.
— Click Reboot after to indicate the devices should be rebooted at a later time, and enter the
number of hours (up to 72) to wait before doing the reboot.
4 Click Apply to start the software download to the selected devices.
Click Reset to return the window to its initial state (removing all devices from the Upgrade Image
on Devices list, removing all image selections, and so on).
5 When the upgrade process has completed, click Close to close the Download Image on Device
window.

Upgrading Slot Images on Modular Devices

To download a new ExtremeWare software or BootROM image to an Extreme module, click the
Upgrade button at the top of the window and select the Device Slot tab.
The Download Image on Device Slot window appears, as shown in Figure 78.
178 EPICenter Software Installation and User Guide