Configure Dos-Protect Type L3-Protect Notify-Threshold - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

Security Commands

configure dos-protect type l3-protect notify-threshold

configure dos-protect type l3-protect notify-threshold <packets>

Configures the denial of service protection notification threshold.

Syntax Description

Specifies how many packets in an interval will cause a notification.

The default is 3500 packets.

Usage Guidelines

This command configures how many packets received in an interval will cause a DoS protection

notification.

This example sets the notification threshold to 7500 packets:

configure dos-protect type l3-protect notify-threshold 7500

This command was first available in ExtremeWare XOS 11.1

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.3 Command Reference

Do you have a question about the ExtremeWare XOS and is the answer not in the manual?

Extremeware xos 11.3