Show Lacp Member-Port - Extreme Networks ExtremeWare XOS Command Reference Manual

show lacp member-port

show lacp member-port <port> {detail}
Description
Displays LACP, or dynamic link aggregation, settings for the specified port that is a member of any
LAG.
Syntax Description
port
detail
Default
N/A.
Usage Guidelines
This command displays the following information about the specified port:
Member Port
●
Rx State—Receiving state of the port
●
Idle
■
Initialized
■
Current—Receiving LACP PDUs
■
Expired
■
Defaulted
■
Sel Logic—Selection state of the port
●
Selected—Ports with a matching admin key on the remote end.
■
Unselected—Ports that failed to meet with a matching admin key on the remote end.
■
Standby—Ports that exceed the number of ports that can be active in the LAG simultaneously.
■
These ports can be moved into selected mode if one of the currently selected ports in the LAG
goes down.
Mux State—Ability to transmit and collect data of the port
●
Waiting—Selected port that is waiting for LACP to determine if it can join the aggregator.
■
Attached—Ports ready to be added to the aggregator.
■
Collecting-Dist—Ports that are added to the aggregator and are transferring data.
■
Detached—Ports that cannot be added to the aggregator.
■
Actor Flag
●
A—Activity
■
T—Timeout
■
ExtremeWare XOS 11.3 Command Reference
Specifies the port number.
Show detailed information.
show lacp member-port
347