ACL Commands
disable access-list refresh blackhole
disable access-list refresh blackhole
Description
Disables blackholing of packets during ACL refresh.
Syntax Description
This command has no arguments or variables.
Default
The feature is enabled.
Usage Guidelines
When access control lists (ACLs) are refreshed, this feature provides that any packets arriving during
the refresh will be blackholed. As the ACL is being refreshed, packets may arrive while the ACL is in an
indeterminate state, and packets may be permitted that otherwise are dropped. This feature protects the
switch during an ACL refresh.
If you disable this feature, you may get unexpected results as the ACL is refreshed.
To enable this feature, use the following command:
enable access-list refresh blackhole
Example
The following command disables dropping of packets during an ACL refresh:
disable access-list refresh blackhole
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
674
ExtremeWare XOS 11.3 Command Reference