Configure Snmpv3 Add Target-Addr - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmpv3 add target-addr

configure snmpv3 add target-addr [[hex <hex_addr_name] | <addr_name>] param
[[hex <hex_param_name] | <param_name>] ipaddress [[<ip_address>
{<netmask>}] | <ip_address>] {transport-port <port_number> {from
<src_ip_address>} {tag-list <tag_list>} {volatile}
Description
Adds and configures an SNMPv3 target address and associates filtering, security, and notifications with
that address.
Syntax Description
hex_addr_name
addr_name
hex_param_name
param_name
ip_address
port_number
src_ip_address
tag-list
volatile
Default
The default values are:
transport-port—port 162
●
non-volatile storage
●
If you do not specify
tag-list
is used.
Usage Guidelines
Use this command to create an entry in the SNMPv3 snmpTargetAddressTable. The
associates the target address with an entry in the snmpTargetParamsTable, which specifies security and
storage parameters for messages to the target address, and an entry in the snmpNotifyFilterProfileTable,
which specifies filter profiles to use for notifications to the target address. The filter profiles are
associated with the filters in the snmpNotifyFilterTable.
The list of tag-lists must match one or more of the tags in the snmpNotifyTable for the trap to be sent
out.
ExtremeWare XOS 11.3 Command Reference
Specifies a string identifier for the target address. The value is to be supplied
as a colon separated string of hex octets.
Specifies a string identifier for the target address in ASCII format.
Specifies the parameter name associated with the target. The value is to be
supplied as a colon separated string of hex octets.
Specifies the parameter name associated with the target in ASCII format.
Specifies an SNMPv3 target IP address.
Specifies a UDP port. Default is 162.
Specifies the IP address of a VLAN to be used as the source address for the
trap.
Specifies a list of comma separated string identifiers for the notifications to be
sent to the target.
Specifies volatile storage. By specifying volatile storage, the configuration is
not saved across a switch reboot.
the single tag defaultNotify, a pre-defined value in the snmpNotifyTable,
configure snmpv3 add target-addr
parameter
param
133