Configure Lldp Ports System-Description - Extreme Networks ExtremeWare XOS Command Reference Manual

configure lldp ports system-description

configure lldp ports [all | <port_list>] [advertise | no-advertise] system-
description
Description
Configures the LLDP port to advertise or not to advertise its system description to its neighbors.
Syntax Description
all
port_list
advertise
no-advertise
Default
Advertise.
Usage Guidelines
Although not mandatory according to the standard, this TLV is included in the LLDPU by default when
you enable LLDP.
When enabled, the system sends the following image (from the
system description TLV:
ExtremeWare XOS version 11.2.0.12 v1120b12 by release-manager
on Fri Mar 18 16:01:08 PST 2005
Example
The following command configures port 1:4 through port 1:8 to not advertise the system description
information to neighbors:
configure lldp ports 1:4 - 1:8 no-advertise system-description
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
configure lldp ports system-description
command) in the
show version
383