Configure Mirroring Add - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

configure mirroring add

configure mirroring add [vlan <name> {port <port>}| port <port> {vlan
<name>}] {ingress | egress | ingress-and-egress}
Description
Adds a particular mirroring filter definition on the switch.
Syntax Description
vlan
name
port
port
ingress
egress
ingress-and-egress
Default
N/A.
Usage Guidelines
You must enable port-mirroring using the
configure the mirroring filter definitions.
Port mirroring configures the switch to copy all traffic associated with one or more ports to a monitor
port on the switch. The switch uses a traffic filter that copies a group of traffic to the monitor port.
Up to 16 mirroring filters and one monitor port can be configured on the switch. Frames that contain
errors are not mirrored.
BlackDiamond 8800 family of switches (formerly known as Aspen) and the Summit X450 switch only. The
traffic filter can be defined based on one of the following criteria:
Physical port—All data that traverses the port, regardless of VLAN configuration, is copied to the
●
monitor port. You can specify which traffic the port mirrors:
Ingress—Mirrors traffic received at the port.
■
290
Specifies a VLAN.
Specifies a VLAN name.
Specifies a port or slot and port.
Specifies particular ports or slots and ports.
Specifies packets be mirrored as they are received on a port.
NOTE: This parameter is available only on the BlackDiamond 8800 family of
switches and the Summit X450 switch and only with port-based mirroring.
Specifies packets be mirrored as they are sent from a port.
NOTE: This parameter is available only on the BlackDiamond 8800 family of
switches and the Summit X450 switch and only with port-based mirroring.
Specifies all forwarded packets be mirrored. This is the default setting on the
Aspen family of switches and the Summit X450 switch for port-based
mirroring.
NOTE: This parameter is available only on the BlackDiamond 8800 family of
switches and the Summit X450 switch and only with port-based mirroring.
enable mirroring to port
command before you can
ExtremeWare XOS 11.3 Command Reference