enable stpd ports
enable stpd <stpd_name> ports [all | <port_list>]
Description
Enables the STP protocol on one or more ports.
Syntax Description
stpd_name
all
port_list
Default
Enabled.
Usage Guidelines
If you create an STPD with a unique name, the keyword
If STP is enabled for a port, BPDUs are generated and processed on that port if STP is enabled for the
associated STPD.
You must configure one or more STPDs before you can use the
create an STPD, use the
create stpd <stpd_name>
and experience with STP, you can configure the STPD using the
the default STP parameters are adequate for most networks.
Example
The following command enables slot 2, port 4 on an STPD named Backbone_st:
enable stpd backbone_st ports 2:4
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an STPD on the switch.
Specifies all ports for a given STPD.
Specifies one or more ports or slots and ports.
command. If you have considerable knowledge
is optional.
stpd
enable stpd ports
configure stpd
enable stpd ports
command. To
commands. However,
971