Extreme Networks ExtremeWare XOS Command Reference Manual page 729

family of switches and the Summit X450 switch are shown in this section; the BlackDiamond 8800
family of switches and the Summit X450 switch do not support ingressing QoS profiles.
Weight—1
●
Maximum buffer—100%
●
BlackDiamond 10K switch only. the default values for egressing QoS profiles and ingressing QoS profiles
on the BlackDiamond 10K switch are shown in this section.
Ingress QoS is disabled by default.
Minimum bandwidth—0%
●
Maximum bandwidth—100%
●
Minimum committed and peak rates—1 Kbps
●
Maximum committed and peak rates—varies by I/O module:
●
1G I/O module—1,000 Mbps
■
10G I/O module—10,000 Mbps
■
Ingress priority—By default, each qosprofile is assigned a different priority level, which varies by I/
●
O module:
1G I/O module:
■
IQP1 - 1 Low
■
IQP2 - 1, LowHi
■
10G I/O module:
■
IQP1 - 1, Low
■
IQP2 - 2, LowHi
■
IQP3 - 3, Normal
■
IQP4 - 4, NormalHi
■
IQP5 - 5, Medium
■
IQP6 - 6, MediumHi
■
IQP7 - 7, High
■
IQP8 - 8, HighHi (highest priority)
■
Egress priority
●
QP1 - 1, Low
■
QP2 - 2, LowHi
■
QP3 - 3, Normal
■
QP4 - 4, NormalHi
■
QP5 - 5, Medium
■
QP6 - 6, MediumHi
■
QP7 - 7, High
■
QP8 - 8, HighHi (highest priority)
■
ExtremeWare XOS 11.3 Command Reference
unconfigure qosprofile
729