Extreme Networks ExtremeWare XOS Command Reference Manual page 618

VLAN Commands
Secondary IPs:
IPv6:
STPD:
Protocol:
Loopback:
NetLogIn:
Rate Shape:
QosProfile:
Ports:
Untag:
Flags:
NOTE
The m flag for MAC-based port represents network login information; it is only supported on the BlackDiamond 8800
family of switches and the Summit X450 switch.
NOTE
The number of active ports line displays the number of ports presently in forwarding state on this VLAN.
The output for the
configured on the switch.
NOTE
See Chapter 22
History
This command was first available in ExtremeWare XOS 10.1.
The IPv6 information was added in ExtremeWare XOS 11.2.
The netlogin information was added in ExtremeWare XOS 11.3.
618
12.0.0.5/8
None
s0(Disabled,Auto-bind)
Match all unfiltered protocols
Disable
Enabled
Disable
QP1
771. (Number of active ports=0)
3:2, 4:1,
5:5, 5:6,
5:12, 5:13,
5:19, 5:20,
5:26, 5:27,
5:33, 5:34,
5:40, 5:41,
5:47, 5:48,
5:54, 5:55,
5:61, 5:62,
5:68, 5:69,
5:75, 5:76,
5:82, 5:83,
(*) Active,
(g) Load Sharing port
(a) Authenticated NetLogin port
(m) MAC-based port
show vlan detail
for information on adding secondary IP addresses to VLANs.
4:2, 5:1,
5:7, 5:8,
5:14, 5:15, 5:16,
5:21, 5:22, 5:23,
5:28, 5:29, 5:30,
5:35, 5:36, 5:37,
5:42, 5:43, 5:44,
5:49, 5:50, 5:51,
5:56, 5:57, 5:58,
5:63, 5:64, 5:65,
5:70, 5:71, 5:72,
5:77, 5:78, 5:79,
5:84, 5:85, 5:86,
(!) Disabled
(b) Port blocked on the vlan,
(u) Unauthenticated NetLogin port
command displays the same information for all VLANs
5:2, 5:3, 5:4,
5:9, 5:10, 5:11,
5:17, 5:18,
5:24, 5:25,
5:31, 5:32,
5:38, 5:39,
5:45, 5:46,
5:52, 5:53,
5:59, 5:60,
5:66, 5:67,
5:73, 5:74,
5:80, 5:81,
5:87, 5:88,
ExtremeWare XOS 11.3 Command Reference