Extreme Networks ExtremeWare XOS Command Reference Manual page 575

severity—on
●
event-name—none
●
host-name—off
●
sequence-number—off
●
process-name—off
●
process-slot—on (modular switches only)
●
process-id—off
●
source-line—off
●
Usage Guidelines
NOTE
The BlackDiamond 8800 family of switches and the Summit X450 switch do not support user-created VRs.
Use this command to reset the target format to the default format.
Example
The following command sets the log format for the target
unconfigure log target session format
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
unconfigure log target format
(the current session) to the default:
session
575