Show Access-List Counter - Extreme Networks ExtremeWare XOS Command Reference Manual

show access-list counter

show access-list counter {<countername>} {any | ports <portlist> | vlan
<vlanname>} {ingress | egress}
Description
Displays the specified access list counters.
Syntax Description
countername
portlist
vlanname
ingress
egress
Default
The default direction is ingress.
Usage Guidelines
Use this command to display the ACL counters.
Example
The following example displays all the counters for all ACLs:
show access-list counter
The output of this command is similar to the following:
Policy Name Vlan Name
Counter Name
=====================================================================
firewall1 *
DENY_SYN
PERMIT_SYN_ACK
tc_2.4 *
arp192
denyAll
destIp
destIp2
tcp *
PERMIT_SYN_ACK
TCP_flag *
denyAll
ipArp
ExtremeWare XOS 11.3 Command Reference
Specifies the ACL counter to display.
Specifies to display the counters on these ports.
Specifies to display the counters on the VLAN.
Specifies to display ingress counters.
Specifies to display egress counters.
Port Direction
Packet Count
* ingress
0
1228300404
2:1 ingress
3
0
0
0
2:7 ingress
0
3:6 ingress
0
0
show access-list counter
Byte Count
0
1920048848
204
0
0
0
0
0
0
679