Extreme Networks ExtremeWare XOS Command Reference Manual page 541

Filter Name : DefaultFilter
Match regex : Any
Severity : Info (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Log Filter Name: DefaultFilter
I/
E Comp. Sub-comp.
- ------- ----------- ----------------------- --------
I All
Log Filter Name: myFilter
I/
E Comp. Sub-comp.
- ------- ----------- ----------------------- --------
I STP
Include/Exclude: I - Include,
Component Unreg: * - Component/Subcomponent is not currently registered
Severity Values: C - Critical,
Debug Severity : S - Debug-Summary,
+ - Debug Severities, but log debug-mode not enabled
If Match parameters present:
Parameter Flags: S - Source,
I - Ingress,
Parameter Types: Port - Physical Port list,
MAC
VID
L4
Nbr
Proc - Process Name
Strict Match : Y - every match parameter entered must be present in the event
N - match parameters need not be present in the event
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Condition
Condition
E - Exclude
E - Error,
V - Debug-Verbose,
D - Destination, (as applicable)
E - Egress,
- MAC address, IP - IP Address/netmask,
- Virtual LAN ID (tag),
- Layer-4 Port #, Num
- Neighbor, Rtr - Routerid, EAPS - EAPS Domain
Severity
CEWNISVD
--------
Severity
CEWNISVD
--------
W - Warning, N - Notice,
D - Debug-Data
B - BGP
Slot - Physical Slot #
Mask - Netmask
VLAN - Virtual LAN name
- Number, Str - String
show log configuration
I - Info
541