Configure Lldp Ports Vendor-Specific Dot3 Max-Frame-Size - Extreme Networks ExtremeWare XOS Command Reference Manual

LLDP Commands
configure lldp ports vendor-specific dot3 max-frame-
size
configure lldp ports [all | <port_list>] [advertise | no-advertise] vendor-
specific dot3 max-frame-size
Description
Configures the LLDP port to advertise or not advertise its maximum frame size to its neighbors.
Syntax Description
all
port_list
advertise
no-advertise
Default
No advertise.
Usage Guidelines
When jumbo frames are not enabled on the specified port, the TLV reports a value of 1518 once you
configure it to advertise. If jumbo frames are enabled, the TLV inserts the configured value for the
jumbo frames.
Example
The following command configures ports 1:12 and 1:13 to advertise the maximum frame size to
neighbors:
configure lldp ports 1:12 - 1:13 advertise vendor-specific dot3 max-frame-size
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
392
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
ExtremeWare XOS 11.3 Command Reference