Configure Lldp Ports Vendor-Specific Dot3 Power-Via-Mdi - Extreme Networks ExtremeWare XOS Command Reference Manual

configure lldp ports vendor-specific dot3 power-via-mdi

configure lldp ports [all | <port_list>] [advertise | no-advertise] vendor-
specific dot3 power-via-mdi
Description
Configures the LLDP port to advertise or not advertise Power over Ethernet (PoE) capabilities to its
neighbors.
Syntax Description
all
port_list
advertise
no-advertise
Default
No advertise.
Usage Guidelines
When configured, the system includes this TLV. Extreme Networks recommends enabling this TLV only
on PoE-capable ports.
The following information is transmitted for LLDP ports with this TLV:
Support PoE or not
●
Port class
●
Power sourcing equipment (PSE)
■
Powered device (PD)
■
Power pairs used to supply power
●
Signal
■
Spare
■
Power status
●
Support pairs control or not
●
Power class
●
Class0
■
Class1
■
Class2
■
Class2
■
Class3
■
Class4
■
ExtremeWare XOS 11.3 Command Reference
configure lldp ports vendor-specific dot3 power-via-mdi
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
393