System Configuration
Deleting a DHCP Quarantine Area
To delete a DHCP quarantine area:
Home window>>System configuration>>Quarantining
1 Click delete next to the quarantine area you want to remove. The Delete quarantine area
confirmation window appears
2 Click yes.
Quarantining, Inline
To select the Inline quarantine method:
Home window>>System configuration>>Quarantining
1 Select a cluster.
2 In the Quarantine method area, select the Inline radio button.
3 Click ok.
Post-connect
Post-connect in Sentriant AG provides an interface where you can configure external systems, such as
IDS/IPS, that request quarantining of an endpoint based on activity that occurs after the endpoint has
connected to the network (post-connect).
Allowing the Post-connect Service Through the Firewall
The firewall must be opened for each post-connect service that communicates with Sentriant AG.
To open the firewall for your post-connect service:
Command line window
1 Log in to the Sentriant AG MS as
2 Enter the following command at the command prompt:
iptables -I INPUT -s<host> -m tcp -p tcp --dport 61616 -j ACCEPT
Where
<host>
120
using SSH or directly with a keyboard.
root
is the external server IP address.
Sentriant AG Software Users Guide, Version 5.2