Disable Dot1P Examination Inner-Tag Port - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

disable dot1p examination inner-tag port

disable dot1p examination inner-tag port [all | <port_list>]

Used with VMANs, and instructs the switch to examine the 802.1p value of the outer tag, or added

VMAN header, to determine the correct egress queue on the egress port.

Syntax Description

Usage Guidelines

Use this command to instruct the system to refer to the 802.1p value contained in the outer tag, or

VMAN encapsulation tag, when assigning the packet to an egress queue at the egress port of the

for information on configuring and displaying the current 802.1p and DiffServ configuration for the

inner, or original header, 802.1p value.

The following command uses the 802.1p value on the outer tag, or VMAN encapsulation, to put the

packet in the egress queue on the VMAN egress port:

disable dot1p examination inner-tag port 3:2

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available only on the BlackDiamond 8800 family of switches (formerly known as

Aspen) and the Summit X450 switch.

ExtremeWare XOS 11.3 Command Reference

Specifies all ports.

Specifies a list of ports or slots and ports.

disable dot1p examination inner-tag port

Extremeware xos 11.3