Configure Log Display - Extreme Networks ExtremeWare XOS Command Reference Manual

configure log display

configure log display <severity> {only}
Description
Configures the real-time log-level message to display.
Syntax Description
severity
only
Default
If not specified, messages of all severities are displayed on the console display.
Usage Guidelines
You must enable the log display before messages are displayed on the log display. Use the
command to enable the log display. This allows you to configure the system to maintain a
display
running real-time display of log messages on the console.
Severity filters the log to display messages with the selected severity or higher (more critical). Severities
include critical, error, warning, info, notice, debug-summary, debug-verbose, and debug-data.
You can also control log data to different targets. The command equivalent to
is the following:
configure log target console-display severity <severity>
To display the current configuration of the log display, use the following command:
show log configuration target console-display
Example
The following command configures the system log to maintain a running real-time display of log
messages of critical severity or higher:
configure log display critical
The following command configures the system log to maintain a running real-time display of only log
messages of critical severity:
configure log display critical only
ExtremeWare XOS 11.3 Command Reference
Specifies a message severity. Severities include critical, error, warning, notice,
info, debug-summary, debug-verbose, and debug-data.
Specifies only log messages of the specified severity level.
configure log display
enable log
configure log display
461