Disable Stpd Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

STP Commands

disable stpd ports

disable stpd <stpd_name> ports [all | <port_list>]
Description
Disables STP on one or more ports for a given STPD.
Syntax Description
stpd_name
all
port_list
Default
Enabled.
Usage Guidelines
If you create the STPD with a unique name, the keyword
Disabling STP on one or more ports puts those ports in the forwarding state; all BPDUs received on those
ports are disregarded and dropped.
Use the keyword to specify that all ports of a given STPD are disabled.
all
Use the
port_list
If you do not use the default STPD, you must create one or more STPDs and configure and enable the
STPD before you can use the
Example
The following command disables slot 2, port 4 on an STPD named Backbone_st:
disable stpd backbone_st ports 2:4
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
966
Specifies an STPD name on the switch.
Specifies all ports for a given STPD.
Specifies one or more ports or slots and ports.
parameter to specify a list of ports of a given STPD are disabled.
disable stpd ports
is optional.
stpd
command.
ExtremeWare XOS 11.3 Command Reference