Configure Snmpv3 Add Mib-View - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmpv3 add mib-view

configure snmpv3 add
subtree <object_identifier> {/<subtree_mask>} {type [included | excluded]}
{volatile}
Description
Adds (and modifies) a MIB view.
Syntax Description
hex_view_name
view_name
object_identifier
subtree_mask
included
excluded
volatile
Default
The default
mask
volatile.
Usage Guidelines
Use this command to create a MIB view into a subtree of the MIB. If the view already exists, this
command modifies the view to additionally include or exclude the specified subtree.
In addition to the created MIB views, there are three default views. They are of storage type permanent
and cannot be deleted, but they can be modified. The default views are: defaultUserView,
defaultAdminView, and defaultNotifyView.
Example
The following command creates the MIB view allMIB with the subtree 1.3 included as non-volatile:
configure snmpv3 add mib-view allMIB subtree 1.3
The following command creates the view extremeMib with the subtree 1.3.6.1.4.1.1916 included as non-
volatile:
configure snmpv3 add mib-view extremeMib subtree 1.3.6.1.4.1.1916
130
mib-view
Specifies the MIB view name to add or modify. The value is to be supplies as
a colon separated string of hex octets.
Specifies the MIB view name to add or modify in ASCII format.
Specifies a MIB subtree.
Specifies a hex octet string used to mask the subtree. For example, f7a
indicates 1.1.1.1.0.1.1.1.1.0.1.0.
Specifies that the MIB subtree defined by <subtree>/<mask> is to be included.
Specifies that the MIB subtree defined by <subtree>/<mask> is to be
excluded.
Specifies volatile storage.
value is an empty string (all 1s). The other default values are
[[hex <hex_view_name>] | <view_name>]
ExtremeWare XOS 11.3 Command Reference
and non-
included