Configure Vlan Protocol - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vlan protocol

configure vlan <vlan_name> protocol <protocol_name>
Description
Configures a VLAN to use a specific protocol filter.
Syntax Description
vlan_name
protocol_name
Default
Protocol .
any
Usage Guidelines
If the keyword is specified, all packets that cannot be classified into another protocol-based VLAN
any
are assigned to this VLAN as the default for its member ports.
Use the
configure protocol
Example
The following command configures a VLAN named accounting as an IP protocol-based VLAN:
configure accounting protocol ip
ExtremeWare XOS 11.3 Command Reference
Specifies a VLAN name.
Specifies a protocol filter name. This can be the name of a predefined protocol
filter, or one you have defined.
The following protocol filters are predefined:
• IP
• IPv6
• IPX
• NetBIOS
• DECNet
• IPX_8022
• IPX_SNAP
• AppleTalk
any indicates that this VLAN should act as the default VLAN for its member
ports.
command to define your own protocol filter.
configure vlan protocol
595