Configure Snmpv3 Delete Notify - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmpv3 delete notify

configure snmpv3 delete notify [{[[hex <hex_notify_name>] | <notify_name>]}
| all-non-defaults]
Description
Deletes an entry from the snmpNotifyTable.
Syntax Description
hex_notify_name
notify_name
all-non-defaults
Default
N/A.
Usage Guidelines
Use this command to delete an entry from the snmpNotifyTable. When a notification is to be sent, this
table is examined. For the target addresses that have been associated with the tags present in the table,
notifications will be sent, based on the filters also associated with the target addresses.
The one default notification that cannot be deleted is defaultNotify.
Example
The following command removes the N1 entry from the table:
configure snmpv3 delete notify N1
History
This command was first available in ExtremeWare XOS 10.1.
The parameter was added in ExtremeWare XOS 11.0.
hex_notify_name
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies the notify name to add. The value is to be supplied as a colon
separated string of hex octets.
Specifies the notify name to add in ASCII format.
Specifies that all non-default (non-permanent) notifications are to be deleted.
configure snmpv3 delete notify
149