Table of Contents
Advertisement
Advertisement
Chapters
Table of Contents
Related Manuals for Extreme Networks ExtremeXOS ScreenPlay
Summary of Contents for Extreme Networks ExtremeXOS ScreenPlay
- Page 1 ExtremeXOS ScreenPlay User Guide Published: 2010 Part Number: 100400-00 Rev 01...
- Page 2 Networks logo, the Alpine logo, the BlackDiamond logo, the Extreme Turbodrive logo, the Summit logos, and the Powered by ExtremeXOS logo are trademarks or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and/or other countries.
-
Page 3: Table Of Contents
Table of Contents Chapter 1: ExtremeXOS ScreenPlay User Guide 5 Overview 5 Setting Up ScreenPlay 5 HTTP and HTTPS Setup 5 Web Access Using HTTP 5 Web Access Using HTTPS 6 Client Setup 6 Launching ScreenPlay 6 ScreenPlay Dashboard 8... - Page 4 Table of Contents ExtremeXOS ScreenPlay User Guide...
-
Page 5: Chapter 1: Extremexos Screenplay User Guide
NOTE The screens shown in this chapter were captured from a variety of Extreme Networks switches. In some cases the information displayed on the screen varies somewhat depending on the switch being used. -
Page 6: Web Access Using Https
ExtremeXOS ScreenPlay User Guide SummitX450a-48t.1 # enable web http The switch is now ready for web access using HTTP at the URL "http:// <switch_ip>". Web Access Using HTTPS To enable HTTPS web access, you must first check to see if the SSL module is installed. - Page 7 ExtremeXOS ScreenPlay User Guide Figure 1: Login Window The ScreenPlay login window displays the switch IP address. You must enter a user name and password for access. The user name and password used are the same that you use to access the CLI from a Telnet or SSH session.
-
Page 8: Screenplay Dashboard
ExtremeXOS ScreenPlay User Guide ScreenPlay Dashboard Next, the ScreenPlay Dashboard appears. The dashboard is the home screen, or opening screen, of ScreenPlay. This screen provides you with a one-glance- snapshot of switch status, inventory, and management details. The main dashboard is divided into three information panes that are shown in... -
Page 9: Screenplay Common Functions
ExtremeXOS ScreenPlay User Guide Table 1: Dashboard Details Name Description and Function Switch Summary Contains summary information about the switch, including: • The switch name, location, system type, MAC address, and boot version. • Hardware information, such as the number of slots, fan trays, and power modules in the switch as well as the status of those elements. -
Page 10: Menu Bar
Provides the capability to issue CLI commands from within the “Administration—CLI Shell” on page 40 application. Refer to Help Services & Technical Support Opens the Services and Support page on Extreme Networks’ web site. http://www.extremenetworks.com/services/services- hub.aspx ExtremeXOS ScreenPlay User Guide... -
Page 11: Dashboard Switch Summary Icons
ExtremeXOS ScreenPlay User Guide Table 2: Menu Bar (Continued) Menu Item Description EXOS Command Reference Guide Links to a PDF copy of the current ExtremeXOS Command Reference Guide. EXOS Concepts Guide Links to a PDF copy of the current ExtremeXOS Concepts Guide. -
Page 12: Configuring The Refresh And Timeout And Cli Settings
ExtremeXOS ScreenPlay User Guide Configuring the Refresh and Timeout and CLI Settings Following are the defaults for the following refresh, timeout and CLI settings: General Refresh Interval - Default is 15 seconds. ■ Web Service Timeout - Default is 45 seconds. -
Page 13: Dashboard Workspace
ExtremeXOS ScreenPlay User Guide Print an original or modified table by clicking the print icon located just ■ above the table. A standard print box opens. This icon prints the specific table only and prints it as it appears on the screen; if any cell contents are hidden on the screen, they are hidden on the printed copy. -
Page 14: Configuration
ExtremeXOS ScreenPlay User Guide Screen/Pane Description Provides information about the hardware units: the type of system; the running Inventory Information temperature with a colored indicator; and the total number of days that the switch has been in service. Click the different unit to display additional... - Page 15 ExtremeXOS ScreenPlay User Guide Figure 6: Ports Configuration Screen with Single Port Details Screen/Panel Description Port List Lists the ports and their respective Flags (see Figure 11), Port State, Link State, Link Speed, Duplex Mode, Auto Negotiation, Jumbo frames and Load Master.
- Page 16 ExtremeXOS ScreenPlay User Guide Figure 7 displays the QoS details tab, and the table below it describes its elements. Figure 7: Port Details—QoS Screen/Pane Description QoS Tab Displays the QoS Profile name, Egress Traffic Rate Limiting setting: Egress Port rate, Max Burst Size, Broadcast Rate, Mulitcast Rate, Unknown DestMac Rate and Ingress IPTOS Examination.
-
Page 17: Modifying Multiple Ports
ExtremeXOS ScreenPlay User Guide Figure 9: Port Details—Sharing & Redundancy Screen/Pane Description Sharing & Redundancy Tab Displays Load Sharing: Load sharing/link aggregation algorithm, Master Port and Members. On modular switches and SummitStack, displays Software-Controlled Redundancy, the Primary and Redundant Ports, and allows Smart Redundancy and Software Redundant Port Link to be enabled or disabled. - Page 18 ExtremeXOS ScreenPlay User Guide Figure 10: Ports Configuration Screen with Multiple Port Details Screen/Pane Description Displays details for two or more ports selected from the Port List. Multiple Port Details Save Form Allows a Port Display Name to be provided and Ingress IPTOS Examinations, Ingress 802.1p Examinations, Ingress 802.1p Inner Exam, Egress IPTOS...
-
Page 19: Configuration-Vlans
ExtremeXOS ScreenPlay User Guide Figure 11: Flags Legend - Configuration Configuration—VLANs This feature allows you to create, modify, and delete VLANs, add ports to VLANs and configure them. The topics available through the VLAN configuration screen are: VLAN list ■... - Page 20 ExtremeXOS ScreenPlay User Guide Screen/Pane Description Lists the VLANs and their respective names, Tags, Protocol Addresses, Flags, VLAN List Protocol filters, Active and Total Ports, and Virtual Routers. Allows VLANs to be created, deleted, enabled, disabled, The table can be customized and captured and manually refreshed.
- Page 21 ExtremeXOS ScreenPlay User Guide Figure 13 displays the DHCP (Dynamic Host Configuration Protocol) tab, and the table below it describes its elements. Figure 13: Configuration—VLAN Details—DHCP Screen/Pane Description DHCP Allows modification to: DHCP (Dynamic Host Configuration Protocol) Address, Default Gateway, DNS (Domain Name Servers) Server, WINS (Windows Internet Naming Service) Server, and Lease Time.
-
Page 22: Vlan Configuration Procedures
ExtremeXOS ScreenPlay User Guide VLAN Configuration Procedures Following are common procedures for using VLAN Configuration functions. To Create a VLAN From the VLAN List screen, click the Create command button. The New VLAN Details pane is displayed. (This pane matches that shown in Figure 12.) - Page 23 ExtremeXOS ScreenPlay User Guide Figure 15 shows the stacking configuration screen of the ScreenPlay tool, and the table below it describes its elements. Figure 15: Stacking Configuration Screen Screen/Pane Description Displays the active topology for the stack (ring or daisy chain) and for each...
-
Page 24: Configuration-Snmp
ExtremeXOS ScreenPlay User Guide Configuration—SNMP This feature allows you to view the SNMP configuration on the switch. The information provided is useful to view the settings that are used by an SNMP client communicating with the switch. The tool allows you to view and manipulate... - Page 25 ExtremeXOS ScreenPlay User Guide Screen/Pane Description SNMP Settings Displays SNMP configuration settings and access status. SNMP Statistics Displays SNMP statistics. Move the cursor over each item in the list to show a tool tip with additional explanation of each. Clicking the Delta view box, starts a count up of new actions beginning from the time the box is checked.
-
Page 26: Configuration-Dynamic Acls
ExtremeXOS ScreenPlay User Guide Configuration—Dynamic ACLs This feature allows you to manage dynamic ACLs. It provide a process that is easier than the long command line syntax from the CLI. The following functionality is included. Displays the ACLs currently existing on the switch ■... -
Page 27: Dynamic Acl Procedures
ExtremeXOS ScreenPlay User Guide Dynamic ACL Procedures Following are common procedures for using Dynamic ACL functions. Creating ACLs To create an ACL: Click the Create command button to display a new ACL template in the Create Dynamic ACL pane. 2 Replace <ACLrulename> with a name. - Page 28 ExtremeXOS ScreenPlay User Guide To unbind all interfaces at once, click the Select All box. Click Unbind ACL. 2 In the ACLs on device pane, click the ACL to be removed then click the Delete command button. Figure 18: Applying an ACL to an Interface...
-
Page 29: Statistics And Monitoring
ExtremeXOS ScreenPlay User Guide Statistics and Monitoring This section provides an overview of the three statistics and monitoring panes available through ScreenPlay: Statistics & Monitoring—Event Log on page 29 ■ Statistics & Monitoring—Ports on page 30 ■ Statistics & Monitoring—QoS on page 34 ■... -
Page 30: Statistics & Monitoring-Ports
ExtremeXOS ScreenPlay User Guide Statistics & Monitoring—Ports This feature allows you to view the live statistics of the ports as various kinds of charts and tables. The charts and tables are viewed in the following tabbed screens: Utilization Chart ■... - Page 31 ExtremeXOS ScreenPlay User Guide Figure 20: Statistics & Monitoring—Port Statistics—Utilization Chart Screen Screen/Pane Description Utilization Chart Graphically displays port utilization, received and transmitted. Allows the graph to be plotted in bytes per second, packets per second or as a percentage of bandwidth.
- Page 32 ExtremeXOS ScreenPlay User Guide Figure 21 shows the Statistics Table tab information, and the table below it describes its elements. Figure 21: Statistics & Monitoring—Port Statistics—Statistics Table Screen Screen/Pane Description Statistics Table Lists the available ports and their link state, bandwidth utilization—as a number or percent—transmitted byte or packet count, received byte or packet count,...
- Page 33 ExtremeXOS ScreenPlay User Guide Figure 22 shows the Bandwidth Chart, and the table below it describes its elements. Figure 22: Statistics & Monitoring—Port Statistics—Bandwidth Chart Screen Screen/Pane Description Bandwidth Chart Displays in a bar chart, the percentage of bandwidth being utilized for each port.
-
Page 34: Statistics & Monitoring-Qos
ExtremeXOS ScreenPlay User Guide Statistics & Monitoring—QoS This feature allows you to monitor QoS information on a port (both bytes and packets). Figure 23 shows the QoS monitoring screen, and the table below it describes its elements. Figure 23: Statistics & Monitoring—QoS Monitor Screen... -
Page 35: Administration-User Accounts
ExtremeXOS ScreenPlay User Guide Administration—CLI Shell on page 40 (Beginning with ExtremeXOS 12.1) ■ Administration—User Accounts This feature allows you to manage user accounts on a switch. This includes the ability to add, modify and delete user accounts local to the switch and to configure remote RADIUS AAA or TACACS servers. - Page 36 ExtremeXOS ScreenPlay User Guide Screen/Pane Description Local Users Tab Displays the users and information on their accounts Allows you to Create or Delete a user account, Unlock a user account and change a Password. The table can be customized and captured.
- Page 37 ExtremeXOS ScreenPlay User Guide Figure 26 shows the RADIUS screen, and the table below it describes its elements. Figure 26: User Accounts—RADIUS Screen Screen/Pane Description RADIUS Tab Displays Authentication and Accounting information for both the Primary and Secondary servers. This includes numbers of various access and response events.
- Page 38 ExtremeXOS ScreenPlay User Guide Figure 27 shows the TACACS screen, and the table below it describes its elements. Figure 27: User Accounts—TACACS Screen Screen/Pane Description TACACS Tab Allows you to configure Status, Timeout, IP Addresses, Ports, Shared Secrets, Client IP Addresses and Virtual Routers for Authentication and Accounting Primary and Secondary servers.
-
Page 39: Administration-User Sessions
ExtremeXOS ScreenPlay User Guide Administration—User Sessions This feature shows the list of SSH, XML, and Telnet sessions on the switch. It includes the ability to view current and historical sessions and allow administrators to kill rogue sessions. The features available through the sessions management... -
Page 40: Administration-Cli Shell
■ Command History ■ To use the CLI Shell, you must first download and install a CLI proxy installable service/daemon. “CLIProxy_window” can be found on the Extreme Networks’ website. Figure 29 shows the CLI shell screen of the ScreenPlay tool. -
Page 41: Help
ExtremeXOS ScreenPlay User Guide Figure 29: CLI Shell Screen Screen/Pane Description CLI shell Displays a CLI screen on which commands can be entered. You can change the appearance of the screen. The settings for the foreground and background colors as well the CLI Shell Port can be reset, as shown in... - Page 42 ExtremeXOS ScreenPlay User Guide ExtremeXOS ScreenPlay User Guide...