Disable Diffserv Examination Port - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

QoS Commands

disable diffserv examination port

disable diffserv examination port [<port_list> | all]

Disables the examination of the DiffServ field in an IP packet.

Syntax Description

Usage Guidelines

The diffserv examination feature is disabled by default.

BlackDiamond 10K switch only. If a port is in more than one virtual router, you cannot use the DiffServ

feature. The default VLAN DiffServ examination mappings apply on ports in more than one VR. If you

attempt to configure DiffServ.1p information on a port that is in more than one virtual router, the

system returns the following message:

Warning: Port belongs to more than one VR. Port properties related to diff serv and

code replacement will not take effect.

The following command disables DiffServ examination on selected ports:

disable diffserv examination ports 5:3,5:5,6:6

This command was first available in ExtremeWare XOS 10.1.

Platform Availability

This command is available on all platforms.

Specifies a list of ports or slots and ports to which the parameters apply.

Specifies that DiffServ examination should be disabled for all ports.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3