Extreme Networks ExtremeWare XOS Command Reference Manual page 254

Commands for Managing the ExtremeWare XOS Software
To display the status of ExtremeWare XOS processes on the switch, including how many times a process
has been restarted, use the
command. The following is a truncated sample of the show process command on the Summit X450
switch:
Process Name
-------------------------------------------------------------------------
aaa
acl
bgp
cfgmgr
cli
devmgr
dirser
dosprotect
eaps
...
You can also use the
more information, see the section
Upgrade and Boot
Example
The following command stops and restarts the process tftpd during a software upgrade:
restart process tftpd
The following command stops and restarts all instances of the OSPF routing protocol for all VRs during
a software upgrade:
restart process class ospf
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
254
show process {<name>} {detail} {description} {slot <slotid>}
Version Restart
3.0.0.2 0 Ready
3.0.0.2 0 Ready
Not Started 0 No license
3.0.0.21 0 Ready
3.0.0.22 0 Ready
3.0.0.2 0 Ready
3.0.0.2 0 Ready
3.0.0.1 0 Ready
3.0.0.8 0 Ready
command when upgrading a software modular package. For
restart process
"Upgrading a Modular Software Package"
Options" of the ExtremeWare XOS Concepts Guide.
State Start Time
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:54 2005
Not Started
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:51 2005
Thu Sep 1 17:00:56 2005
Thu Sep 1 17:00:53 2005
in Appendix A, "Software
ExtremeWare XOS 11.3 Command Reference