Configure Snmpv3 Add User - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmpv3 add user

configure snmpv3 add user [[hex <hex_user_name>] | <user_name>]
{authentication [md5 | sha] [hex <hex_auth_password> | <auth_password>]}
{privacy [hex <hex_priv_password> | <priv_password>]} {volatile}
Description
Adds (and modifies) an SNMPv3 user.
Syntax Description
hex_user_name
user_name
MD5
SHA
authentication
privacy
volatile
Default
The default values are:
authentication—no authentication
●
privacy—no privacy
●
non-volatile storage
●
Usage Guidelines
Use this command to create or modify an SNMPv3 user configuration.
If hex is specified, supply a 16 octet hex string for MD5, or a 20 octet hex string for SHA.
You must specify authentication if you want to specify privacy. There is no support for privacy without
authentication.
The default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv. The initial
password for admin is password. For the other default users, the initial password is the user name.
ExtremeWare XOS 11.3 Command Reference
Specifies the user name to add or modify. The value is to be supplied as a
colon separated string of hex octets.
Specifies the user name to add or modify in ASCII format.
Specifies MD5 authentication.
Specifies SHA authentication.
Specifies the authentication password or hex string to use for generating the
authentication key for this user.
Specifies the privacy password or hex string to use for generating the privacy
key for this user.
Specifies volatile storage. By specifying volatile storage, the configuration is
not saved across a switch reboot.
configure snmpv3 add user
137