Extreme Networks ExtremeWare XOS Command Reference Manual page 976

STP Commands
Example
The following command displays the state of slot 3, ports 1 through 3 on an STPD named s0:
show stpd S0 ports 3:1-3:3
The following is sample output from this command:
Port Mode
3:1 802.1D FORWARDING 100
3:2 802.1D FORWARDING 100
3:3 802.1D FORWARDING 100
Total Ports: 3
------------------------- Flags: ----------------------------
1:
2: (Port role)
3: (Config type)
4: (Oper. type)
5:
6: (partner mode) d = 802.1d, w = 802.1w, s = 802.1s
7:
The following command displays the detailed information for the ports in STPD S0:
show stpd S0 ports detail
The following is sample output from this command:
Stpd: s0
Port Mode: 802.1D
Port State:
Port Priority: 16
Designated Root:
Designated Bridge: 00:00:00:00:00:00:00:00
Partner STP version: Dot1d
Participating Vlans: Default
Stpd: s0
Port Mode: 802.1D
Port State:
Port Priority: 16
Designated Root:
Designated Bridge: 00:00:00:00:00:00:00:00
Partner STP version: Dot1d
Participating Vlans: Default
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
976
State Cost Flags
e------- 16
e------- 16
e------- 16
e=Enable, d=Disable
R=Root, D=Designated, A=Alternate, B=Backup
b=broadcast, p=point-to-point, e=edge, a=auto
b=broadcast, p=point-to-point, e=edge
p=proposing, a=agree
i = edgeport inconsistency
Port: 1:1 PortId: 8002
FORWARDING Topology Change Ack: FALSE
00:00:00:00:00:00:00:00
Port: 1:2 PortId: 8002
FORWARDING Topology Change Ack: FALSE
00:00:00:00:00:00:00:00
Priority Port ID Designated Bridge
16641 00:00:00:00:00:00:00:00
16642 00:00:00:00:00:00:00:00
16643 00:00:00:00:00:00:00:00
Stp: ENABLED
Designated Cost: 0
Designated Port Id: 0
Stp: ENABLED
Designated Cost: 0
Designated Port Id: 0
ExtremeWare XOS 11.3 Command Reference
Path Cost: 19
Path Cost: 19