Power Over Ethernet Commands
unconfigure inline-power budget slot
unconfigure inline-power budget slot <slot>
Description
Unconfigures the inline reserved power on the specified slot and returns the power budget on that slot
to the default value of 50 W.
Syntax Description
slot
Specifies the slot.
Default
50 W.
Usage Guidelines
This command unconfigures any previously configured power budget for the specified slot and resets
the budgeted power reserved for all PDs connected to this slot to 50 W. The rest of the previously
configured power budget on this slot cannot be used to power other slots or PDs on other slots (unless
you explicitly reconfigure the power budget for other slots).
If you specify a slot that does not have a PoE module, the system returns the following error message:
Error: Slot 2 is not capable of inline-power.
Example
The following command resets the power for slot 4 to 50 W:
unconfigure inline-power budget slot 4
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the G48P module installed in the BlackDiamond 8800 family of
switches.
450
ExtremeWare XOS 11.3 Command Reference