Disable Sys-Health-Check - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Status Monitoring and Statistics

disable sys-health-check

disable sys-health-check slot <slot>
Description
Discontinues sending backplane diagnostic packets.
Syntax Description
slot
Default
Polling is enabled, backplane diagnostic packets are disabled.
Depending upon your platform, when disabling backplane diagnostic packets, the following defaults
apply:
BlackDiamond 10K switch—By default, the system health checker discontinues sending backplane
●
diagnostic packets and returns the polling frequency to 60 seconds on the specified slot. Only polling
is enabled.
BlackDiamond 8800 family of switches—By default, the system health checker discontinues sending
●
backplane diagnostic packets to the specified slot. Only polling is enabled.
Usage Guidelines
When you use this command, backplane diagnostic packets are disabled and no longer sent by the
system health checker.
BlackDiamond 10K Switch Only. If you use this command, in addition to disabling backplane diagnostic
packets, the polling frequency returns to the default of 60 seconds for the specified slot.
If you modify the
the polling frequency is
polling frequency is now 70 seconds.
BlackDiamond 8800 Family of Switches Only. If you modify the
health-check interval <interval>
configured interval for sending backplane diagnostic packets remains. The next time you enable
backplane diagnostic packets, the health checker sends backplane diagnostics packets at the configured
interval. For example, if you configure an interval of 8 seconds, the system health checker sends
backplane diagnostic packets every 8 seconds.
To return to the "default" interval of 5 seconds, configure the frequency of sending backplane diagnostic
packets to 5 seconds using the following command:
configure sys-health-check interval 5
514
Specifies the slot to disable sending backplane diagnostic packets.
in the
interval configure sys-health-check interval <interval>
*10 seconds. For example, if you configured an interval of 7, the
interval
command and later disable backplane diagnostics, the
in the
interval configure sys-
ExtremeWare XOS 11.3 Command Reference
command,