Extreme Networks ExtremeWare XOS Command Reference Manual page 633

Example
The following command displays the virtual router configurations on the switch:
show virtual-router
The following is sample output from this command:
---------------------------------------------------------
Virtual Router
---------------------------------------------------------
VR-Control
VR-Default
VR-Mgmt
---------------------------------------------------------
Flags : Routing protocols configured on the virtual router
(b) BGP, (o) OSPF, (r) RIP, (p) PIM
The following command displays the virtual router helix:
show virtual-router helix
The following is sample output from this command:
Virtual router : helix
No of ports : 2
Port List : 3:1-2
Protocols Configured:
Protocol: BGP,
Protocol: RIP,
History
A command similar to this command was available in ExtremeWare XOS 10.1 (
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available only on the BlackDiamond 10K switch.
ExtremeWare XOS 11.3 Command Reference
Number of Number of
Vlans Ports
0 0
4 776
1 0
Process Name: bgp-4
Process Name: rip-4
Flags
----
bopr
----
show virtual-router
).
show vr
633