Configure Vr Delete Protocol - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vr delete protocol

configure vr <vr-name> delete protocol <protocol-name>
Description
Stops and removes the layer 3 protocol on a virtual router.
Syntax Description
vr-name
protocol-name
Default
N/A.
Usage Guidelines
You cannot add or delete protocols from the system virtual routers, VR-Mgmt, VR-Control, VR-Default.
Example
The following command shutdowns and removes RIP from the virtual router vr-acme:
configure vr vr-acme delete protocol rip
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available only on the BlackDiamond 10K switch.
ExtremeWare XOS 11.3 Command Reference
Specifies the name of the virtual router.
Specifies the layer 3 protocol.
configure vr delete protocol
629