Measurement Surveys
Show All Markers
To show the display of all measurement text in the drawing, click Measurement Survey > Display
Measurement Data > Show All Markers.
Reposition and Scale
Selecting the Measurement Survey > Display Measurement Data > Reposition and Scale command allows
you to move existing measurement points in the drawing. You have the option of relocating individual
measurement points or adjusting the scale of an entire measurement run. When adjusting the scale of a
run, the marker's position relative to each other remains the same but the distance between them
increases or decreases depending on your scaling.
Hide All Markers
To hide the display of all measurement text in the drawing, click Measurement Survey > Display
Measurement Data > Hide All Markers.
Configure Markers/Tracklines
To configure Markers/Tracklines, select Measurement Survey > Display Measurement Data > Configure
Markers/Tracklines.
Type or select Measurement Marker Size and Trackline Arrowhead Size.
Managing Access Points
The following workflow example provides an overview of the primary steps for selecting, placing, and
configuring access points.
Summit WMScanner Users Guide
130