Disable Cli-Config-Logging - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Status Monitoring and Statistics

disable cli-config-logging

disable cli-config-logging
Description
Disables the logging of CLI configuration commands to the switch Syslog.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
Every command is displayed in the log window which allows you to view every command executed on
the switch.
The command discontinues the recording of all switch configuration
disable cli-config-logging
changes and their sources that are made using the CLI via Telnet or the local console. After you disable
configuration logging, no further changes are logged to the system log.
To view the status of configuration logging on the switch, use the command. The
show management
command displays information about the switch including the enable/disable state
show management
for configuration logging.
Example
The following command disables the logging of CLI configuration command to the Syslog:
disable cli-config-logging
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
506
ExtremeWare XOS 11.3 Command Reference