Extreme Networks ExtremeWare XOS Command Reference Manual page 216

Commands for Managing the Switch
The following command shows information about the group testgroup and user name testuser:
show snmpv3 group testgroup user testuser
The following is sample output from this command:
Group Name
Security Name
Security Model
Storage Type
Row Status
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_group_name
Platform Availability
This command is available on all platforms.
216
: testgroup
: testuser
: USM
: NonVolatile
: Active
and parameters were added in ExtremeWare XOS 11.0.
hex_user_name
ExtremeWare XOS 11.3 Command Reference