Configure Lldp Ports Vendor-Specific Dot3 Mac-Phy - Extreme Networks ExtremeWare XOS Command Reference Manual

configure lldp ports vendor-specific dot3 mac-phy

configure lldp ports [all | <port_list>] [advertise | no-advertise] vendor-
specific dot3 mac-phy
Description
Configures the LLDP port to advertise or not advertise MAC and physical layer capabilities to its
neighbors. The capabilities include duplex and bit rate.
Syntax Description
all
port_list
advertise
no-advertise
Default
No advertise.
Usage Guidelines
When configured, the system add information about the speed capabilities, as well as autonegotiation
support and status, of the LLDP port.
Example
The following command configures all ports to advertise MAC/PHY capabilities to neighbors:
configure lldp ports all advertise vendor-specific dot3 mac-phy
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
configure lldp ports vendor-specific dot3 mac-phy
391