Check Policy - Extreme Networks ExtremeWare XOS Command Reference Manual

Policy Manager Commands

check policy

check policy <policy-name>
Description
Checks the syntax of the specified policy.
Syntax Description
policy-name Specifies the policy to check.
Default
N/A.
Usage Guidelines
Use this command to check the policy syntax before applying it. If any errors are found, the line
number and a description of the syntax error are displayed. A policy that contains syntax errors will not
be applied.
This command can only determine if the syntax of the policy file is correct and can be loaded into the
policy manager database. Since a policy can be used by multiple applications, a particular application
may have additional constraints on allowable policies.
Example
The following example checks the syntax of the policy zone5:
check policy zone5
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
650
ExtremeWare XOS 11.3 Command Reference