Extreme Networks ExtremeWare XOS Command Reference Manual page 887

Version 11.3
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

The following display shows output for the command
:
detail
Rule Name: rule-delta
================================================================================
DELTA(counter1) = 0 sampled at 24 seconds ago
Expression evaluation is currently FALSE
if (DELTA(counter1) > 1000) then {
PERMIT:
Allow ACL rule acl-rule-3
SYSLOG:
[INFO] [Delta $ruleValue counter $counter1 offset $counterOffset1
delTime $deltaTime delay $delayTime]
CLI:
[disable port $port]
QOS:
Set rule acl-rule-4 qos value to QP6
} else {
DENY:
Block ACL rule acl-rule-3
QOS:
Set rule acl-rule-4 qos value to QP1
CLI:
[enable port $port]
}
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the BlackDiamond 10K platform only.
ExtremeWare XOS 11.3 Command Reference
show clear-flow port 2:6 rule rule-delta
Sample Period: 30
show clear-flow rule
Hysteresis: 20
887

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.3

Table of Contents