Show Qosprofile - Extreme Networks ExtremeWare XOS Command Reference Manual

QoS Commands

show qosprofile

show qosprofile {ingress | egress} {ports [ all | <port_list>]}
Description
Displays QoS information on the switch.
Syntax Description
Ingress
egress
ports
port_list
all
Default
Displays egress QoS information for all ports.
Usage Guidelines
The displayed QoS profile information differs depending on the platform you are running on.
BlackDiamond 8800 family of switches (formerly known as Aspen) and Summit X450 switch only. The
following information displays for these switches:
Available Qos profiles
●
Weight
●
Percentage of maximum buffer
●
BlackDiamond 10K switch only. If you do not specify the variable
information for egress QoS values.
The following information displays for the BlackDiamond 10K switch for each QoS profile:
Qos profile
●
Minimum bandwidth
●
Maximum bandwidth
●
Priority
●
724
Specifies ingress queues.
NOTE: This parameter is available only on the BlackDiamond 10K switch.
Specifies egress queues; this is the default value.
NOTE: This parameter is available only on the BlackDiamond 10K switch.
Specifies to display information for specified ports.
NOTE: This parameter is available only on the BlackDiamond 10K switch.
Specifies a list of slots and ports.
NOTE: This parameter is available only on the BlackDiamond 10K switch.
Specifies all ports.
NOTE: This parameter is available only on the BlackDiamond 10K switch.
, the system displays the
ingress
ExtremeWare XOS 11.3 Command Reference