Enable Xml-Mode - Extreme Networks ExtremeWare XOS Command Reference Manual

enable xml-mode

enable xml-mode
enable xml-mode
Description
Enables XML configuration mode on the switch.
Command Syntax
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command enables the XML configuration mode on the switch, however XML configuration mode
is not supported for end users, and Extreme Networks strongly cautions you not to enable this mode.
Use this command only under the direction of Extreme Networks.
If you inadvertently issue this command, the switch prompt will be changed by adding the text
(xml)
to the front of the prompt. If you see this mode indicator, please disable XML configuration mode by
using the following command:
disable xml-mode
Example
The following command enables XML configuration mode on the switch:
enable xml-mode
History
This command was first available in an ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
247
ExtremeWare XOS 11.3 Command Reference