Show Lldp Statistics - Extreme Networks ExtremeWare XOS Command Reference Manual

LLDP Commands

show lldp statistics

show lldp {port [all | <port_list>]} statistics
Description
Displays statistical counters related to the specified port or ports.
Syntax Description
all
port_list
Default
N/A.
Usage Guidelines
The following counters are presented with the standard command (taken from the IEEE 802.1ab MIB
definition):
Last table change time: Last time an entry in the LLDP database was added, changed or deleted.
●
Number of table inserts: The number of times the complete set of information advertised by a
●
particular neighbor has been inserted into tables.
Number of table deletes: The number of times the complete set of information advertised by a
●
particular neighbor has been deleted from tables.
Number of table drops: The number of times the complete set of information advertised by a
●
particular neighbor could not be stored in memory because of insufficient resources.
Number of table age outs: The number of times the complete set of information advertised by a
●
particular neighbor has been deleted from tables because the information timeliness interval has
expired.
Tx Total: The number of LLDP frames transmitted by this switch on the indicated port.
●
Tx Total Length Exceeded: The number of LLDP frames sent out on this port that could not hold all
●
the information configured because the total frame length would exceed the maximum LDDPDU
size of 1500 bytes.
Rx Total: The number of valid LLDP frames received by this switch on the indicated port, while this
●
LLDP agent is enabled.
Rx Discarded: The number of LLDP frames received by this switch on the indicated port, and then
●
discarded for any reason.
Rx Errors: The number of invalid LLDP frames received by this switch on the indicated port, while
●
this LLDP agent is enabled.
TLVs Discarded: The number of LLDP TLVs discarded for any reason by this switch on the indicated
●
port.
TLVs Unrecognized: The number of LLDP TLVs received on the given port that are not recognized
●
by the switch.
408
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
ExtremeWare XOS 11.3 Command Reference