Show Inline-Power Configuration Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

show inline-power configuration ports

show inline-power configuration ports <port_list>
Description
Displays inline power configuration information for the specified ports.
Syntax Description
port_list
Default
N/A.
Usage Guidelines
The output displays the following inline power configuration information for the specified ports:
Config—Indicates whether the port is enabled to provide inline power:
●
Enabled: The port can provide inline power.
■
Disabled: The port cannot provide inline power.
■
Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.
●
Priority—Displays inline power priority of the port, which is used when the disconnect precedence
●
is set to lowest priority:
Low
■
High
■
Critical
■
Label—Displays a text string, if any, associated with the port.
●
Example
The following command displays inline power configuration information for ports 1 to 10 in slot 3:
show inline-power configuration port 3:1-10
Following is sample output from this command:
Port Config Operator Limit
3:1 Enabled 15000 mW
3:2 Enabled 15000 mW
3:3 Enabled 15000 mW
3:4 Enabled 15000 mW
3:5 Enabled 15000 mW
3:6 Enabled 15000 mW
3:7 Enabled 15000 mW
3:8 Enabled 15000 mW
ExtremeWare XOS 11.3 Command Reference
Specifies one or more ports. May be in the form 2:*, 2:5, 2:6-2:8.
Priority Label
Low
Low
Low
Low
Low
Low
Low
Low
show inline-power configuration ports
439