Disable Rmon - Extreme Networks ExtremeWare XOS Command Reference Manual

disable rmon

disable rmon
disable rmon
Description
Disables the collection of RMON statistics on the switch.
Syntax Description
This command has no arguments or variables.
Default
By default, RMON is disabled. However, even in the disabled state, the switch responds to RMON
queries and sets for alarms and events.
Usage Guidelines
The switch supports four out of nine groups of Ethernet RMON statistics. In a disabled state, the switch
continues to respond queries of statistics. Collecting of history, alarms, and events is stopped; however,
the switch still queries old data.
To view the status of RMON polling on the switch, use the command. The
show management show
command displays information about the switch including the enable/disable state for
management
RMON polling.
To view the RMON memory usage statistics for a specific memory type (for example, statistics, events,
logs, history, or alarms) or for all memory types, use the following command:
show rmon memory {detail | <memoryType>}
Example
The following command disables the collection of RMON statistics on the switch:
disable rmon
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
511
ExtremeWare XOS 11.3 Command Reference